Model: s1 & b2 Bank Series (specs are the same for the both of them) ok.gif
- Bezel is plastic
- Bezel is color: Black, solid black (you can paint it what color you want)
- Reads track 1 and 2
- Stores up to 2000 swipes
- Contains a rechargeable internal battery which lasts for approximately 2 days
before it dies (53 to 54 hours none stop)
- Battery takes about 4 hours to fully charge, charges by plugging skimmer in.
- All data read is time stamped by time, seconds, day, month and year.
- Reads both bi-directional swipes (this means this skimmer will read cards when they go in and also when they are pulled out.
- The button to power on and off skimmer is at the backside.
- Contains a green and red LED to show when it reads and gives errors on
the back of bezel.
- Skimmer is password protected, this means you cannot collected the dumps from it without a password. This works good for people who work with partners they may not trust.
- Comes with full manual and software included in the package.
- Backside of bezel that sticks to the machine is completely flush (flat).
- Backside of the slot in the bezel is open more so a card can slide right
back inside the bezel without problems
- Bezel is filled with special hard epoxy to protect the electronics from breaking and
to insure no wires ever come lose.
- Skimmer is jitter proof.
What is listed in your manual?
Introduction
Chaptor 1: Batteries
Chaptor 2: Configuring your skimmer
Chaptor 4: Testing your skimmer
Chaptor 5: Installing skimmers (How thieves install skimmers to atm’s)
Chaptor 6: Painting your skimmer (How thieves match the color of atms)
Chaptor 7: Camera equipment (how thieves setup cameras at ATMs and the different methods and equipment they use.
Chaptor 8 (model b2 only): How to make your own labels for skimmer identical to the bank labels.
Troubleshooting
how can i be sue to get it at home ?
ReplyDeleteIs it legal to having it
ReplyDelete